Anhui Yulong Heavy Industry Equipment Manufacturing Co., Ltd.-Longmen Processing Center

DMV Series — Gantry Machining Center

Adopts a structure in which the gantry frame is fixed, the worktable moves on the bed body (X axis), the headstock moves on the sliding saddle (Z axis), and the sliding saddle together with the headstock moves on the beam (Y axis); The standard speed change gear box realizes the perfect combination of high precision and strong cutting. The headstock adopts a model structure with square ram fully contained. Through the two-stage speed change gear box, it meets the requirements of cutting. Mainly to the processing of black and non-ferrous metal small and medium-sized complex parts as the object.

Suitable for civil aviation, automotive, energy, information, mold and other industries parts processing.

Our current gantry processing center covers 14, 16, 18, 27, 32, 36, 42, 46 a total of eight series.

01

Beam adopts a "meter" shaped design structure, and the cross-sectional design structure of the beam, and the cross-sectional area of the beam: 848 (upper) * 952 (lower) * 982 (higher) is much larger than that of similar products in the market, and three guide rails can be optionally installed.

02

The base is cast in one piece, equipped with two roller heavy-duty guide rails, which effectively guarantees the stability of the movement of the workbench under heavy load.

03

Column adopts a large cross-section box structure design, which effectively guarantees the overall rigidity, and the customer chooses to use one-piece casting for column height.

04

Workbench are installed by means of "meter" shaped reinforcement to improve the support rigidity and ensure the excellent bearing capacity of the workbench. The transverse layout design of T-slot specially equipped in the mold industry can also be selected to improve the assembly efficiency.

Mechanical Characteristics

Technical Parameters

05

Adopts the direct connection design of the embedded gearbox, which increases the cutting torque on the one hand and the deep cavity processing of the workpiece on the other hand.

06

32/36 series base adopts splicing structure worktable main movement area for integral casting, to ensure the overall accuracy of bearing movement.

Project			Series 14	16 Series	18 Series
Specifications		Unit	DMV-1614	DMV-2016	DMV-2018	DMV-2518	DMV-3018	Custom Models
Processing range	Door width	mm	1420	1650	1800	1800	1800	according to customer needs, custom production: crane type gantry Moving column gantry Super gate wide gantry Moving beam five-axis gantry
	X-axis travel	mm	1700	2100	2300	2600	3100
	Y-axis travel	mm	1500	1750	2060	2060	2060
	Z-axis travel	mm	700	700	800	800	800
	spindle end face to work table	mm	150-850	150-850	135-935	135-935	135-935
Workbench	Table size	mm	1700*1200	2200*1400	2000*1500	2500*1500	3000*1500
	T-slot size	mm	22	22	22	22	22
	maximum load-bearing	kg	3500	4000	8000	8000	9000
spindle	drive form		belt/straight connection	belt/straight connection	/Direct connection gearbox	/Direct connection gearbox	Direct coupling gearbox
	spindle hole specifications		BT40	BT40	BT50	BT50	BT50
	Spindle speed	rpm	8000/10000/12000	8000/10000/12000	6000	6000	6000
	spindle power	kw	11/15	11/15	18.5/22	18.5/22	18.5/22
tool magazine	hilt form		BT40	BT40	BT50	BT50	BT50
	magazine capacity	T	24	24	24	24	24
	maximum tool length	mm	300	300	300	300	300
Other	Power Capacity	KVA	30	30	40	40	40
	Supply Pressure Requirement (Minimum)	kg/cm²	6	6	6	6	6
	machine size (length * width * height)	mm	560038004000	600040004300	600045004800	700045004800	800045004800
	Machine Net Weight	kg	13000	17000	20500	22000	23500
	numerical control system		FANUC	FANUC	FANUC	FANUC	FANUC

Project			42 Series		Series 46
Specifications		Unit	DMV-6242FY	DMV-8242FY	DMV-6246FY	DMV-8246FY	Custom Models
Processing range	Door width	mm	4200	4200	4600	4600	according to customer needs, custom production: Crankhead Gantry Moving column gantry Super gate wide gantry Moving beam five-axis gantry
	X-axis travel	mm	6200	8500	6200	8500
	Y-axis travel	mm	4700	4700	5000	5000
	Z-axis travel	mm	1250	1250	1500	1500
	spindle end face to work table	mm	220-1470	220-1470	220-1720	220-1720
Workbench	Table size	mm	6000*3000	8000*3000	6000*3000	8000*3000
	T-slot size	mm	28	28	28	28
	maximum load-bearing	kg	32000	35000	32000	35000
spindle	drive form		Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox
	spindle hole specifications		BT50	BT50	BT50	BT50
	Spindle speed	rpm	3000	3000	3000	3000
	spindle power	kw	30/37	30/37	30/37	30/37
tool magazine	hilt form		BT50	BT50	BT50	BT50
	magazine capacity	T	24, 30	24, 30	24, 30	24, 30
	maximum tool length	mm	300	300	300	300
Other	power capacity	KVA	65	65	65	65
	supply pressure requirement (minimum)	kg/cm²	6	6	6	6
	machine size (length * width * height)	mm	1580072006000	1850072006000	1500075006200	1850075006200
	Machine Net Weight	kg	75000	108000	77000	112000
	numerical control system		FANUC	FANUC	FANUC	FANUC

Project			27 Series
Specifications		Unit	DMV-3227	DMV-4227	DMV-4227FY	DMV-5227	DMV-5227FY	Custom Models
Processing range	Door width	mm	2700	2700	2700	2700	2700	according to customer demand, custom production: Cranch type gantry Moving column gantry Super gate wide gantry Moving beam five-axis gantry
	X-axis travel	mm	3200	4200	4200	5400	5400
	Y-axis travel	mm	3000	3000	3000	3000	3000
	Z-axis travel	mm	1000	1000	1250	1000	1250
	spindle end face to work table	mm	220-1220	220-1220	220-1470	220-1220	220-1470
Workbench	Table size	mm	3000*2200	4000*2200	4000*2200	5000*2200	5000*2200
	T-slot size	mm	28	28	28	28	28
	maximum load-bearing	kg	13000	18000	18000	20000	20000
spindle	drive form		Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox
	spindle hole specifications		BT50	BT50	BT50	BT50	BT50
	Spindle speed	rpm	6000	6000	3000	6000	3000
	spindle power	kw	22/26	22/26	22/26	22/26	22/26
tool magazine	hilt form		BT50	BT50	BT50	BT50	BT50
	magazine capacity	T	24, 30	24, 30	24, 30	24, 30	24, 30
	maximum tool length	mm	300	300	300	300	300
Other	power capacity	KVA	55	55	55	55	55
	Supply Pressure Requirement (Minimum)	kg/cm²	6	6	6	6	6
	machine size (length * width * height)	mm	1030055006000	1220055006000	1220055006000	1300055006000	1300055006000
	Machine Net Weight	kg	38000	42000	42000	46000	46000
	numerical control system		FANUC	FANUC	FANUC	FANUC	FANUC

Project			32 Series
Specifications		Unit	DMV-4230	DMV-4232FY	DMV-5232FX	DMV-5232FY	DMV-6232FX	DMV-6232FY	Custom Models
Processing range	Door width	mm	3200	3200	2700	2700	2700	3200	according to customer needs, custom production: crane type gantry Moving column gantry Super gate wide gantry Moving beam five-axis gantry
	X-axis travel	mm	4200	4200	4200	5400	5400	6200
	Y-axis travel	mm	3500	3000	3000	3000	3000	3500
	Z-axis travel	mm	1000	1250	1250	1000	1250	1250
	spindle end face to work table	mm	220-1470	220-1470	220-1470	220-1470	220-1470	220-1470
Workbench	Table size	mm	4000*2500	5000*2500	5000*2500	5000*2500	6000*22500	6000*2500
	T-slot size	mm	28	28	28	28	28	28
	maximum load-bearing	kg	22000	22000	25000	25000	30000	30000
spindle	drive form		Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox	Direct coupling gearbox
	spindle hole specifications		BT50	BT50	BT50	BT50	BT50	BT50
	Spindle speed	rpm	6000	3000	6000	3000	6000	3000
	spindle power	kw	22/26	22/26	22/26	22/26	22/26	22/26
tool magazine	hilt form		BT50	BT50	BT50	BT50	BT50	BT50
	magazine capacity	T	24, 30	24, 30	24, 30	24, 30	24, 30	24, 30
	maximum tool length	mm	300	300	300	300	300	300
Other	power capacity	KVA	55	55	55	55	55	55
	Supply Pressure Requirement (Minimum)	kg/cm²	6	6	6	6	6	6
	machine size (length * width * height)	mm	1180065006000	1180065006000	1300065006000	1580065006000	1300055006000	1580065006000
	Machine Net Weight	kg	45000	45000	52000	52000	65000	65000
	numerical control system		FANUC	FANUC	FANUC	FANUC	FANUC	FANUC

The company's products continue to improve, the above information if there is any change, no further notice (specific parameters, please refer to the technical agreement)