-
ꁸ Top
-
ꂅ +86 13702546901
-
ꀥ
+86 13702546901
Liquid Ring Vacuum Pump
SK(2YK) Liquid Ring Vacuum Pump
Product Features
| Suction pressure range: | 160~1013mbar(A) |
| Capacity range: | 2~150 m³/min |
| Application: | suitable for dusty or waterproof conditions. |
| Available materials for wetted end parts: | cast iron |
SK(2YK) water ring vacuum pump is a single-stage, double-acting, radial inlet and exhaust water ring vacuum pump; It is listed as an energy-saving electromechanical product by the state. Sk type of water ring vacuum pump is usually used to pump gases that do not contain solid particles, and are insoluble or slightly soluble in water. Because the gas is nearly isothermal compressed during the working process of the water ring pump, it is also particularly suitable for the suction and pressure delivery of flammable and explosive gases. Pumps generally use water as the working fluid.
Product Introduction
01
Single-stage double action, radial inlet and exhaust, high efficiency and energy saving;
05
It is convenient to disassemble and install the pump body and support feet horizontally;
02
The structure is firm, durable, long service life, and can operate continuously for a long time;
06
Various specifications are equipped with corresponding atmospheric ejectors to improve the suction vacuum.
03
No direct mechanical friction, no contact between impeller and pump body, and no wear;
04
There is a proper gap between the impeller and the distributor, which is not sensitive to dust and particles;
Scope of Application
01
Condenser vacuum and negative pressure ash removal in the power industry.
02
Vacuum distillation, vacuum crystallization, and water deoxidation in oil production in the petrochemical industry.
03
Various vacuum devices in the pharmaceutical industry.
05
Vacuum water diversion in suction and drainage engineering.
04
Various vacuum devices in the pharmaceutical industry.
06
Vacuum system and various vacuum-obtaining processes in the paper industry.
07
Vacuum forming of plastics and rubber.
08
Vacuum flotation and filtration in the coal and mining industry, and gas emission from coal seams.
09
Vacuum system of the tobacco industry.
10
Vacuum system of the tobacco industry.
11
Food packaging or vacuum drying, etc.
Technical Parameters
Suction vacuum: 80-1013hpa
Discharge pressure: 1013hpa
Pumping rate: 9-146m³/ min
Model Representation
For example, SK-42-1BD3-0Y490:
SK is the serial code of the water ring vacuum pump;
42 is the specification code of the vacuum pump;
1 is the code of suction range of the vacuum pump;
B is the code of structural material, B is the main flow passage component, and it is made of ordinary material;
D is the transmission mode code, D is the coupling direct transmission, V is the belt transmission, G is the reducer transmission;
3 is the code of shaft seal form;
0 is the supplementary code of transmission mode;
Y is the code of supporting motor;
490 is the pump speed.
SK(2YK) Liquid Ring Vacuum Pump
Guangdong Kenflo Pump Co.,Ltd. (formerly known as Guangdong Foshan Pump Factory Co., Ltd.), was founded in 1954, is a professional pump manufacturer including R&D, production and sale.
Email: kenfloversea@gmail.com
Whatsapp: +8613702546901
Phone: +86-13702546901
Product Category
_
Quick Links
_
Contact Us
_
