-
ꁸ Top
-
ꂅ +86 13702546901
-
ꀥ
+86 13702546901
Liquid Ring Vacuum Pump
YS Vacuum Priming Device
Product Features
Ys vacuum water diversion device is a finalized vacuum water diversion product developed based on summarizing our company's production experience for many years.
Product Introduction
Scope of Application
Ys vacuum water diversion device is used widely in vacuum water diversion before the start-up of large water pumps in water plants, power plants, papermaking, petrochemical, and other industries. It can replace the traditional structural type of installing a bottom valve at the inlet of the suction pipeline when a large water pump tank water, to reduce the loss of the suction pipeline and improve the suction performance of the water pump. It can also be used on other occasions where the liquid level needs to be raised.
YS Vacuum Priming Device
Specially designed for large and medium-sized pumps before starting water, there are simple, standard, and enhanced three different configuration schemes, that can achieve semi-automatic or fully automatic control, to meet the needs of different users.
| Pumping rate : | 0.45-10m³/ min |
| Caliber : | 25-100mm |
| Diversion volume : | 30 m³ |
| Diversion time : | 5-10min is recommended |
01
The utility model has the advantages of simple structure, mature application, and reasonable configuration.
02
According to different user needs, it can be divided into three different structural configurations: simple type, standard type, and enhanced type.
03
This series of vacuum water diversion devices has 12 specifications and products with appropriate performance can be selected according to the use needs.
04
If the volume of water diversion is required to be larger or the gas volume is required to be larger, please contact the Technology Department of the company for relevant options or carry out the supporting design of relevant units.
Model Representation
For example, YS120-25-2-B:
YS is the series code of the vacuum water diversion device;
120 refers to the specification of the vacuum water diversion device and the specification number of the vacuum pump is borrowed for 12 specifications;
25 refers to the suction inlet diameter of vacuum water diversion device 25mm;
2 represents the number of vacuum pumps configured for the vacuum water diversion device, 2;
B is the configuration code of vacuum water diversion device (J is simple type, B is standard type and Z is enhanced type).
Guangdong Kenflo Pump Co.,Ltd. (formerly known as Guangdong Foshan Pump Factory Co., Ltd.), was founded in 1954, is a professional pump manufacturer including R&D, production and sale.
Email: kenfloversea@gmail.com
Whatsapp: +8613702546901
Phone: +86-13702546901
Product Category
_
Quick Links
_
Contact Us
_
